Capable of full 5-axis contouring
Includes high-speed machining software
Includes side-mount tool changer
Made in the USA
Includes high-speed machining software
Includes side-mount tool changer
Made in the USA
Travels
X Axis
: 1270 mm
Y Axis
: 660 mm
Z Axis
: 635 mm
A Axis - Tilt
: ± 120 °
B Axis - Rotation
: 360 °
Spindle Nose to Platter (~ max)
: 437 mm
Spindle Nose to Table (~ max)
: 742 mm
Spindle Nose to Platter (~ min)
: 198- mm
Spindle Nose to Table (~ min)
: 107 mm
Trunnion
Platter Diameter
: 210 mm
Max Weight on Platter
: 90.7 kg
Max Part Swing (reduced at tilt angles > ± 90°)
: 597 mm
T-Slot Width
: 16 mm
Number of Std T-Slots
: 6
Pilot Bore Depth
: 124.5 mm
Rapids on A
: 60 °/sec
Rapids on B
: 60 °/sec
Max Cutting A
: 33 °/sec
Max Cutting B
: 33 °/sec
Spindle
Max Rating
: 22.4 kW
Max Speed
: 8100 rpm
Max Torque
: 122.0 Nm @ 2000 rpm
Max Torque w/opt Gearbox
: 339 Nm @ 450 rpm
Drive System
: Inline Direct-Drive
Taper
: CT40 | BT40 | HSK-A63
Table
Length
: 1372 mm
Width
: 610 mm
T-Slot Width
: 15.90 mm to 16.00 mm
T-Slot Center Distance
: 80 mm
Number of Std T-Slots
: 7
Max Weight on Table (evenly distributed)
: 1814 kg
Feedrates
Max Cutting
: 12.7 m/min
Rapids on X
: 18.0 m/min
Rapids on Y
: 18.0 m/min
Rapids on Z
: 18.0 m/min
Axis Motors
Max Thrust X
: 11343 N
Max Thrust Y
: 18238 N
Max Thrust Z
: 18238 N
Tool Changer
Type
: SMTC
Capacity
: 30+1
Max Tool Diameter (full)
: 64 mm
Max Tool Diameter (adjacent empty)
: 127 mm
Max Tool Length (from gage line)
: 406 mm
Max Tool Weight
: 5.4 kg
Tool-to-Tool (avg)
: 2.8 s
Chip-to-Chip (avg)
: 3.6 s
General
Coolant Capacity
: 360 L
Air Requirements
Air Required
: 113 L/min @ 6.9 bar
Dimensions - Shipping
Domestic Pallet
: 427 cm x 257 cm x 277 cm
Electrical Specification
Full Load Amps (3 Phase) - High*
: 35 A
